Skip to Content
Dirac LiveProblem exporting filter to Arcam device
Dirac Live

Dirac Live

Problem exporting filter to Arcam device

Problem explanation


After the settings restore on my Arcam AVR31 did not restore the Dirac filters, i had to send the filter settings to my device again. After loading the projectfile there was a "microphone not found" message and i was not able to go to the filter page in Dirac 3.3.3 on my windows 10 pc. Then i noticed i had used an different USB port before. After switching to this USB port, i was able to send the filter to my Arcam.

Why is it not possible to use any USB port for a transfer (no new measurement)?
Why is a microphone necessary at all for a transfer?”


I could load the project and export a filter despite USB mic being connected on the opposite side. I got the warning below, but as you see, it says it succeeded to transfer the filter. I could even calculate a new Live filter based on existing measurements and transfer that as well.

I’m using Dirac Live v3.4.1.

So a warning is issued in the latest DL version but no problem exporting a filter even if we changed the USB port on the computer.

Need more help?

Ask a different questionDirac Live
Select a different product
On this page
Enable superior sound experiences across content and devices, for the many, not the few, through pioneering digital audio solutionsSitemap
MenuDirac for HomeDirac for BusinessOnline Store