Skip to Content
ディラック・ライブBluesound Node/Dirac Live - Known issues
ディラック・ライブ

ディラック・ライブ

Bluesound Node/Dirac Live - Known issues

このソリューションをお試しください。

Bluesound/Dirac Live - Known issues

Here is a list of known issues (and possible fixes) related to the Bluesound Node streamers (N130, N131, N132, N530).

  • In some cases, the Dirac Live iOS app need to be closed and restarted for the NODE device to be discovered.

  • The Master Output gain in Dirac Live does not reset to default low setting when the "Volume Calibration/Measurement Levels" page is entered.

  • Exported Dirac Live filters from one configuration are not deleted when switching to another one (2.0 <==> 2.1 setup).

  • If pops/clicks are heard while performing the measurements, a factory reset of the Node device might be needed.

  • Perceived audio level is lower when the Dirac filter enabled:​

    • Volume sliders during volume calibration do not define the levels during the actual measurement process. You have to manually adjust the subwoofer level (on the Dirac Live Volume Calibration/Measurement Levels page), so it at least matches the levels of the L/R speakers (e.g.-20 dB).

もっと助けが必要ですか?

別の質問をするディラック・ライブ
別の製品を選択する
このページでは
先駆的なデジタル・オーディオ・ソリューションを通じて、コンテンツやデバイスを問わず、少数ではなく多数の人々に優れたサウンド体験を提供する。Sitemap
メニューディラック・フォー・ホームビジネスのためのディラックオンラインストア